eWillys | Your source for Jeep and Willys deals, mods and more (2024)

UPDATE: **SOLD** Was on eBay.

(12/07/2017) That interior could use some work!

“Rare, Hard to find 1958 Jeep FC-170
Complete original engine, transmission, transfer case, and running gear.
Frame has adapter rails bolted on to make a flat bed, but the frame was not altered.
Dash was removed to install push bars.
Some rust above the windshield.
Unique project that draws a lot of attention.
Very easy restoration project.”

UPDATE: **SOLD** Was $1500.

No word on whether it runs or not. No description provided.

UPDATE: **SOLD** Was $225.

Has some value given all the parts.

“Complete Willy’s L134 engine. This engine will need be rebuilt or use for parts as it is stuck. Unaware of condition but complete. Was previously use for stationary engine for welder/generator at a mill. Has been stored inside since I have owned it. $225 cash”

UPDATE:**SOLD**Was $1000.

Seller has sometractor parts.

“I Have A Almost Compleat Rare Empire Tractor For Sale ! Made From 1946-1951 Will Not Part Out ! I Have Front End Grill Dash Jeep Motor Trans. Transfer Case ( Which Is What Came With ) ! Rear Hams 1 Fender Frame I Also Have 2 Others Not For Sale ! Yellow One Is What It Looks Like When Restored !”

UPDATE: **SOLD** Was $12,500.

(12/25/2017) Has a variety of updates.

“This is a real nice great running truck has nice interior, duel exhaust, 302 motor backed by a automatic transmission drove this truck home last month over 300 hundred miles and ran perfect, 65 and 70 miles an hour on highway all day long would not be afraid to drive this truck anywhere. Price is $12,500 or best offer. You just don’t see a truck like this anymore in this good shape.stickers can be removed easily.”]

Ray assembled this cool jeep-bar in his shop!

Great action photo.

View all the information on eBay

“1943-Ford amphibious jeeps loaded with U.S. troops plunging into the water. Photo measures approx. 7″ x 9″”

UPDATE: **SOLD** Was $13,999.

Looksroad ready for a trip to a Roundup (or two).

“Total frame off restoration completed in 2003. Professionally rebuilt stock 4 cyl engine (runs on unleaded) transmission and transfer case rebuild. Complete brake system rebuild including master cylinder, wheel cylinders and all brake lines. Total cab and bed resto. 6000 miles on the FC since the rebuild. Starts, runs and drives great. T90 3 speed transmission. Dana 18 transfer case. Dana 44 axles front and rear. 5:38 differential gearing. Lock out hubs. 12 volt. Single wire alternator. Retrofit electrical powered wipers. Custom wiring harness. Downsizing my life – time to sell…..”

Looks pretty stock. There might be some body damage over the passenger rear wheel well. Could this possibly be a CJ-V35/U? Note the hooks up front. It does have the wrong hood for a V35.

https://missoula.craigslist.org/cto/d/50s-willy-jeep/6508957678.html

“50- 53 willies jeep 4 cyl. willies motor roll bar and tire rack. ran when parked has sat for two years need a little love $4500. o.b.o. clear title”

UPDATE: **SOLD**The pics suggest this may be an MB/GPW.

(09/12/2017) Could use some better pics.

“Original running gear body excellent shape 24000miles”

UPDATE: **SOLD** Was $5000.

This might have a rare set of Kelly Hubs on it.

“Ready to be finished. V6 installed, Overdrive, new seats, floating clutch and brake pedals, upgraded hydraulic system.”

It’s got a variety of updates. Looks like the crossmember is GPW.

https://www.facebook.com/marketplace/item/160167571304425

“We are selling my dad’s 1942 Willys Jeep it has a V-6 Buick power steering tilt steering wheel Dana 60 rear end and possibly a Dana 30 front end, asking 5600, tow bar and spare tire rack.”

UPDATE: The price has been dropped to $9000. I swear there was a serial number of 34043 listed, but if it was there, it is no longer there now.

The serial number of 34043 is a bit late for indents. Given the flat plate over the tranny, this may have been a column shift.

https://losangeles.craigslist.org/wst/cto/d/willys-cj2a-1946/6509323278.html

“1946 willys CJ2A
1948 windshield
4X4
Front tire lock hubs
Starts right up and ready to go.
Needs a little work but not much at all.”

UPDATE: **SOLD** Was on eBay.

Steve’s selling this project. His preference is to sell it to someone who will restore it (rather than part it out). Has some EasyLok hubs.

“Here is a 1944 Willys or maybe a Ford GPW army Jeep. It does have a GPW engine that had the head removed to do a head gasket job that was never finished. The engine does turn over by hand but I have never heard it run. Jeep is still on my trailer as I just bought it for a project and another project just showed up that I can butcher up rather then destroy this one. I left a few spaces to add a couple more pictures as I know their will be lots of questions with this one. The glove box door is gone but the frame rail still retains the vin number. The Jeep does roll very well! I have set of New Old Stock front 10 leaf springs and a drivers side foot rest for the bottom of the fender to go with the Jeep. If it doesn’t sell I will put it into the barn and do something with it at a later date.”

No engine, but still might be worth a look. I don’t see anything that indicates it was every a 1943.

https://www.facebook.com/marketplace/item/1430235823712768

“1943 Willy’s . 350 manual reverse with 500 stall.. new wiring, all MSD , Aeoromotive pump, filter , regulator. 1/4 stick shifter. Dana 44 front and rear with 4:10 gears. Locked in back and open in front. Wheelie bars. Paddle tires rear not the ones in the front. Roll cage tied to frame. NO MOTOR. Have one for sale for additional price”

UPDATE:**SOLD** Was $5000.

John’s selling this FC-150.

“I am asking $5000.00or Best offer
John Escobar”

The poster of this jeep does not appear to be the seller, but the actual seller’s p# appears to be hidden. So, it seems you’ll have to contact the poster to get the p#. The steps appear patched.

https://www.facebook.com/marketplace/item/821831531313135

“Has pinto engine but runs and drives”

Appears worth a look given the price.

https://sandiego.craigslist.org/csd/cto/d/1964-willys-jeep-4×4-4-cly/6509620982.html

“1964 Jeep Willy’s complete ran when parked have all parts headlights fairy solid body, has 5 matching vintage rims, clean title”

UPDATE: **SOLD** Was$900.

Maybe some value here?

“Old beat up jeep. 4×4. No paperwork. Has motor”

Look pretty straight.

https://www.facebook.com/marketplace/item/1039572172850255

“Serious buyer’s only. 1800 dlls OBO. 1941 body No chassis No engine No transmission No title”

UPDATE: **SOLD**Was $75.

“one willys Jeep 16 inch 5 on 5 1/2 bolt pattern split combat style wheel needs cleaning up 75.00”

Bill shard this ad.

https://lancaster.craigslist.org/tls/6505574461.html

“Branden Winches manufactured in Broken Arrow, Oklahoma. Great condition, hardly used if used at all. Bolted on steel brace. I have three available, which have been stored properly for several years.

(1) Model A8-9 3,200 lb capacity full drum
16,000 lb capacity continuous duty

(2) Model ARMS3-10R 4,300 lb capacity full drum
9,000 lb capacity continuous duty

$500 each. Please email if interested.”

No pics provided.

https://bend.craigslist.org/cto/d/42-willys-jeep/6508831845.html

“42 willys jeep have parts to put togather but it is a redo depending on what u want. will send pics if interested”

This brochure suggests that a company called Meyers Aircraft developed the hardtop that was eventually sold/taken-over by Sears. It makes sense that an aircraft company would make an aluminum hardtop. So, there may be a few Meyers’ made hardtops mistaken as Sears or Allstate tops.